Loading ...
Loading ...
Loading ...
24 25USING YOUR OVEN USING YOUR OVEN
USING YOUR OVEN (continued)
Submenu for “Basic Settings”
SYMBOL FUNCTION DESCRIPTION
Set time of day Sets the current time on the clock.
Time indication
When ON, the display shows the current time when you deactivate
the appliance.
Fast heat up
When on, fast heat up will be activated automatically in heating
function. When off, the fast heat up can be activated by pressing
TEMP for 3 seconds at the start of a heating function.
Time extension Activates and deactivates the time extension function.
Display contrast Adjusts the display contrast.
Display brightness Adjusts the display brightness.
Buzzer volume Adjusts the volume of press-tones and signals by degrees.
Key tones
Activates and deactivates the tone of the touch fields. It is not
possible to deactivate the tone of the ON/OFF touch field.
Alarm/error tones Activates and deactivates the alarm tones.
Cleaning reminder Reminds you when to clean the appliance (Pyrolytic models only).
DEMO mode Activation/deactivation code: 2468.
Service Shows the software version and configuration.
Factory settings Resets all settings to factory settings.
Back Back to previous menu
USING YOUR OVEN (continued)
Navigating the menus
1. Turn on the oven
2. Press
or to select the menu option
3. Press OK to move to the submenu or accept
the setting
TIPS & INFORMATION
At each point you can go back to the main
menu with
Setting a heating function
1. Turn on the oven.
2. Select a heating function.
3. Press
to confirm.
4. Set the temperature.
5. Press
to confirm.
Heat-up indicator
When you turn on a heating function, the bar on the
display comes on. The bar shows that the temperature
increases. When temperature is reached the buzzer
sounds 3 times and the bar flashes and then disappears.
Fast Heat Up
This function decreases the heat-up time.
TIPS & INFORMATION
Do not put food in the oven when the Fast
heat up function is on.
To turn on the function, hold
for 3 seconds.
The heat-up indicator alternates.
The temperature bar moves horizontally to indicate that
Fast Heat Up is on.
This function is not available for some oven functions.
Automatic Fast Heat Up
Fast Heat Up can be set to be automatically activated.
1. Go to Settings
2. Go to Fast Heat Up
3. Select ON or OFF to activate or deactivate
automatic Fast Heat Up
Residual heat
When you turn off the oven, the display shows the
residual heat. You can use the heat to keep the food
warm.
Clock functions
Clock functions table
Symbol Clock function Application
Minute Minder
To set a countdown (max.
2 h 30 min). This function
has no effect on the
operation of the oven.
Use
to turn on
the function. Press or
to set the minutes and
OK to start.
Duration
To set how long the oven
works (max. 23 h 59 min).
End Time
To set the switch-off time
for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the time starts to
count down after 5 seconds.
TIPS & INFORMATION
If you use the clock functions: Duration, End Time,
the oven turns off the heating elements after 90%
of the set time. The oven uses the residual heat to
continue the cooking process until the time ends
(3 - 20 minutes).
Setting the clock functions
TIPS & INFORMATION
Before you use the functions: Duration, End Time,
you must set a heating function and temperature
first. The oven turns off automatically.
You can use the functions: Duration and End Time at the
same time if you want to automatically turn on and turn
off the oven on a given time later.
The functions: Duration and End Time do not work when
you use the core temperature sensor.
1. Set a heating function.
2. Press
again and again until the display
shows the necessary clock function and the related
symbol.
3. Press
or to set the necessary time.
4. Press
to confirm.
When the time ends, a signal sounds. The oven turns off.
The display shows a message.
5. Press any symbol to stop the signal.
Time Extension
The function: Time Extension makes the heating function
continue after the end of Duration.
1. When the cooking time ends, a signal sounds.
Press any symbol. The display shows the message.
2. Press
to turn on or to cancel.
3. Set the length of the function.
4. Press
.
Loading ...
Loading ...
Loading ...