Loading ...
Loading ...
Loading ...
48
Maintenance mode in console software
The console has built in maintenance/diagnostic software. The
software will allow you to change the console settings from English
to Metric and turn o the beeping of the speaker when a key is
pressed for example. To enter the Maintenance mode press and
hold down the Start, Stop and Confirm key. Keep holding the keys
down for about 2 seconds and the Message Window will display
“Maintenance mode”. Press the Conrm key to access the menu
below:
• Key test
- Will allow you to test all the keys to make sure they are function
ing. Press all the keys one at a time.
• Display test
- Tests all the display functions by lighting each LED light
sequentially.
• Functions (press Confirm key to access menu)
- Units
Set to English (imperial units) or metric display readings. The default
is imperial, which means data such as body weight and height will
be in pounds and inches.
- Pause mode
Turn on allow 5 minutes of pause, turn o to have the console
pause indenitely.
- Odometer reset
Resets the odometer to zero (Time and distance)
- Beep sound
Turn on or o the speaker to silence beeping sound.
- LED brightness
Adjust the LED brightness.
- Modle
Select the kind of device.
• Service
- Brake test
- CSAFE test
Test the CSAFE functions.
• ANT ID
- Adjust the ANT ID.
• Update code
- Switch bootloader on/o. The default is o.
• Exit
- Press Conrm key to leave maintenance mode and restart.
Loading ...
Loading ...
Loading ...