Loading ...
Loading ...
Loading ...
Easy Advertiser (CRD01/00) English
Revision 32 | 22 December 2008 Page 5
INSTALLATION
MECHANICAL INSTALLATION
1. This card is sensitive to static electricity. Please don't touch components while installing.
2. Before removing the device from its bubble wrap it is advised to work in an antistatic environment.
3. Alternatively touch a grounded metal like water or heating pipe of central heating to discharge any static
electricity.
4. Open package and remove contents.
5. Remove the Easy Advertiser SmartCard from the air bubble wrap.
6. Install the Easy Advertiser SmartCard into the Easy Advertiser SmartCard slot.
a. Locate the Easy Advertiser SmartCard slot opening at the rear end of the display.
b. Unscrew the SmartCard slot cap from the Monitor. Keep the two screws for reuse. NOTE (You can
discard the original SmartCard slot cap and replace it with the new cap included in the package.)
c. Gently slide the Easy Advertiser SmartCard upwards into the SmartCard slot. Slide the Easy
Advertiser SmartCard upward until it is firmly secured.
Loading ...
Loading ...
Loading ...