Loading ...
Loading ...
Loading ...
Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN WLAN Status Channel
- Display the channel in use when Status is
Active.
Speed
- Display the connection speed when Status is
Active.
SSID
- Display SSID.
Comm. Mode
- Display the current Communication mode.
MAC Address
- - Display the MAC address of the machine.
Set to Default
- - Restore wireless network settings of your machine
to the factory settings.
WLAN Enable
- - Turn the wireless interface on or off.
Wi-Fi
Direct
Push Button
- - Configure your Wi-Fi Direct network settings using
the one-button push method quickly.
PIN Code
- - Configure your Wi-Fi Direct network settings using
WPS with a PIN code quickly.
Manual
- - Configure your Wi-Fi Direct network settings
manually.
Group Owner
- - Set your machine as the Group Owner.
Device Info. Device
Name
- View your machine's device name.
SSID
- Display the Group Owner's SSID.
IP Address
- Display your machine's IP Address.
Status Info. Status
- Display the Wi-Fi Direct network status.
Signal
- Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Channel
- Display the channel in use when the Status is
G/O Active or Client Active.
Speed
- Display the connection speed when the Status is
G/O Active or Client Active.
I/F Enable
- - Enable or disable the Wi-Fi Direct connection.
Network
Reset
- - - Restore all network settings of your machine to
the factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’, you must manually enter an IP address from the machine's control panel.
[Network]
For wired network models
Level 1
Level 2 Level 3 Description
TCP/IP Boot Method
- Choose the IP method that best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS Config
- Select the WINS configuration mode.
323
Loading ...
Loading ...
Loading ...