Loading ...
Loading ...
Loading ...
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (HL-L3210CW/HL-L3230CDN/HL-L3230CDW)
Settings Tables (HL-L3210CW/HL-L3230CDN/HL-L3230CDW)
Related Models: HL-L3210CW/HL-L3230CDN/HL-L3230CDW
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.
[General Setup]
Level 1
Level 2 Level 3 Description
Tray Setting Paper Type
- Set the type of paper in the paper tray.
Paper Size
- Set the size of paper.
Check Size
- Select whether to display a message telling you to check that the
size of the paper in the machine and the machine's Paper Size
setting match.
Manual Feed
- Select whether to print from the Manual Feed Slot.
Ecology Eco Mode
- Turn on the following machine settings at the same time.
• 2-sided Print: Long Edge (Available only for certain
models)
• Sleep Time: 0Min
Toner Save
- Increase the page yield of the toner cartridge.
Sleep Time
- Set how much time will pass before the machine enters Power
Saving mode.
Quiet Mode
- Decrease printing noise.
Auto Power Off
- Set the number of hours that the machine will remain in Deep
Sleep mode before going into Power Off mode.
Panel Control Button Repeat
-
Set the time for the LCD message to change when holding a or b
at intervals.
Message Scroll
- Set the time in seconds that an LCD message will scroll across the
LCD. From Level 1=0.2 s to Level 10=2.0 s.
LCD Contrast
- Adjust the contrast of the LCD.
Auto Online
- Set the machine to return to Ready mode after it has been idle for
30 seconds.
Setting Lock
- - Lock your machine’s settings using the Setting Lock password.
Interface Select
- Select the interface to use.
If you select Auto, the machine changes the interface to USB or
Network depending on which interface is receiving data.
Auto IF Time
- Set the time-out period for the auto interface selection.
Input Buffer
- Increase or decrease the input buffer capacity.
Delete Storage Macro ID
- Delete the registered Macro data.
Font ID
- Delete the registered Font data.
Format
- Restore the Macro and Font data of your machine to the default
settings.
[Printer]
Level 2
Level 3 Level 4 Description
Emulation
- - Choose the emulation mode.
319
Loading ...
Loading ...
Loading ...