Loading ...
Loading ...
Loading ...
66
Wind noise reduction
Enable or disable wind noise reduction using the
built-in microphone’s low-cut filter (0 259).
Destination
When two memory cards are inserted, you can
choose the card to which movies are recorded
(0 256).
Monitor brightness
Press 1 or 3 to adjust monitor brightness (note
that this affects live view only and has no effect on
photographs or movies or on the brightness of the
monitor for menus or playback; 0 45).
Multi-selector
power aperture
Select Enable to enable power aperture. Press 1 to
widen the aperture, 3 to narrow the aperture.
Multi selector
exposure comp.
Selecting Enable allows exposure compensation to
be set by pressing 1 or 3.
Highlight display
If Pattern 1 or Pattern 2 is selected, shading will be
used to indicate highlights (bright areas of the
frame). The level of brightness needed to trigger
the highlight display can be selected using Custom
Setting g2 (Highlight brightness, 0 270).
Peaking level is disabled when highlights are
displayed.
Headphone volume
Press 1 or 3 to adjust headphone volume.
Electronic VR
Select On to enable electronic vibration reduction
in movie mode. Not available at frame sizes of 1920
× 1080 (slow-mo) and 3840 × 2160 (0 69). Note
that if electronic vibration is on, Peaking level will
be disabled, the angle of view will be reduced, and
the edges of the frame will be cropped out.
Option Description
Highlights
Pattern 1 Pattern 2
Loading ...
Loading ...
Loading ...