Loading ...
Loading ...
Loading ...
16
MAINTENANCE & CARE
General cleaning will help prolong the life and improve performance of your treadmill. Keep the
unit clean and maintained by dusting the components on a regular basis. Cleaning the two
exposed sides of the Running Belt (No. C23) will prevent dust from accumulating underneath.
Keep your running shoes clean so that dirt from the shoes does not wear the Running Board
(No. D20) and Running Belt (No. C23). Clean the surface of the Running Belt (No. C23) with a
clean damp cloth.
To better maintain the treadmill and prolong its life, it is suggested that the treadmill be powered
off for 10 minutes every 2 hours and fully powered off whenever not in use.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 3-5mph to check if the Running Belt (No. C23)
from the center.
If the Running Belt (No. C23) moves to
the right, turn the adjusting bolt on the
right side ¼ turn clockwise, then turn the
left adjustment bolt ¼ turn counter-
clockwise. If the Running Belt (No. C23)
does not move, repeat this step until it
centers. Refer to Figure A.
If the Running Belt (No. C23) moves to
the left, turn the adjusting bolts on the left
side ¼ turn clockwise, then turn the right
adjustment bolt ¼ turn counter-
clockwise. If the Running Belt (No. C23)
does not move, repeat this step until it
centers. Refer to Figure B.
Over time, the Running Belt (No. C23)
will loosen. To tighten the Running Belt
(No. C23), turn the Left & Right side
adjustment bolts one full turn clockwise,
check the tension of the Running Belt
(No. C23). Continue this process until
Running Belt (No. C23) is at the correct
tension. Make sure to adjust both sides
equally to ensure correct belt alignment.
Refer to Figure C.
Loading ...
Loading ...
Loading ...