Loading ...
Loading ...
Loading ...
(60,1)
北米Model "A1390BE-B" EDITED: 2019/ 10/ 4
& Charging from an external
power source
SHSAE09
WARNING
. Observe the following precau-
tions for charging. Failure to do
so may cause an accident, result-
ing in death or serious injury.
– Connect to a power source
suitable for charging. Refer
to “Power sources that can
be used” FP45.
– Check that the charge port,
charge cable, plug and outlet
are free of foreign matter.
– Only use outlets where the
plug can be securely inserted.
– Do not charge with the charge
cable coiled or bundled.
– Do not coil the 120 V charge
cable while in-use because
the cable may overheat.
– Failure to re-coil the charge
cable when not in-use could
result in strangulation or a
tripping hazard.
– Do not wash the vehicle while
the charge cable is connected
to the vehicle or the charge
port door is open.
– Do not touch the terminals of
the charging connector and
charge port with sharp metal
objects (needles etc.) or by
hand, or short them with for-
eign objects.
– When charging outdoors,
make sure to connect to a
weatherproof outlet for out-
door use.
– Do not insert the plug if the
outlet is submerged in water
or snow.
– Check that no snow, water or
ice has accumulated around
the charging connector term-
inals or the vehicle charge
port while it is raining or
snowing. Tap snow, water or
ice gently from the connector
prior to inserting the charging
connector into the vehicle’s
charge port.
– Do not connect the plug if your
hands are wet. Also, do not get
the plug or outlet wet.
– Do not charge the vehicle
during a lightning storm.
– Do not park with the wheels on
the charge cable, plug, char-
ging connector or Charging
Circuit Interrupting Device.
– Firmly insert the plug into the
outlet.
– Do not use an extension cord
or converting adaptor.
. If the error warning indicator on
the Charging Circuit Interrupting
Device illuminates or flashes dur-
ing charging, there may be an
electrical leak in the power
source path, or there may be a
malfunction in the charge cable
or Charging Circuit Interrupting
Device. Refer to “When a mal-
function occurs during charging”
FP54. If the error warning indi-
cator does not turn off even after
performing the correction proce-
dure, immediately stop charging,
remove the charge cable and
contact your SUBARU dealer.
Continuing to charge the vehicle
in that condition may lead to
accidents or serious injury.
. Remove the plug if it will not be
used for a long time. Dirt and dust
may accumulate in the plug or
outlet, which could cause a mal-
function or fire, possibly leading
Charging
58
Loading ...
Loading ...
Loading ...