Loading ...
Loading ...
Loading ...
(289,1)
北米Model "A1390BE-B" EDITED: 2019/ 10/ 4
6-5. USB power supply
S06AY
CAUTION
. The specification of a USB term-
inal that can be used is the A-
type. If a different specification of
terminal is connected, power
supply or charging may not be
possible, or the device may mal-
function.
. There is a risk that a connected
device may malfunction or data
may be damaged. The connec-
tion of a device shall be per-
formed at your responsibility.
. To avoid an electric shock or a
malfunction, observe the follow-
ing precautions.
– Do not connect a USB hub.
– Do not insert any metal or
other foreign object into the
USB terminal.
– Do not spill water or other
liquid on the USB terminal.
. Be careful not to pull the con-
nected cable. Doing so could
break the USB terminal and the
connected device.
. If a device is connected for a long
time when the engine is not
running, the battery may be dis-
charged. Even when the engine is
running, we recommend that you
do not connect a device for an
unnecessarily long time.
. Do not connect a malfunctioning
device. Doing so may cause the
risk of smoke and fire.
NOTE
. The rated voltage of each USB
terminal is DC 5 V. For details about a
maximum rated power, refer to “How to
use the USB power supply” FP287.
Before connecting a device, be sure to
read the instruction manual of the
device and check whether or not this
specification of the output is supported
by the device. If a device that requires
power exceeding the maximum rating
is connected, power supply or charging
may not be possible. Even if charging
could be completed, the time required
for charging may be longer than when
the genuine charger for that device is
used.
. Depending on the device, charging
may be possible only when a special
cable is used. In this case, be sure to
connect the device using the special
cable.
. When a device that communicates
with a PC is connected, power supply
or charging may not be possible.
. When connect a device for charging,
disconnect the device promptly after
charging is completed.
& How to use the USB power
supply
S06AY01
Use the USB terminal to use or charge an
electronic device.
When the ignition switch is in the “ACC” or
“ON” position, the power can be supplied
to the electronic device. Up to DC 5 V can
be supplied from each terminal.
– CONTINUED –
USB power supply
287
6
Interior equipment
Loading ...
Loading ...
Loading ...