OWNER'S MANUAL - Page 198

For 2020 CROSSTREK HYBRID.

Loading ...
Loading ...
Loading ...
(196,1)
北米Model "A1390BE-B" EDITED: 2019/ 10/ 4
The CHECK ENGINE warning light may
stop blinking and illuminate steadily after
several driving trips. You should have your
vehicle checked by an authorized
SUBARU dealer immediately.
& Hybrid READY indi-
cator light
S03AE99
This light illuminates when the hybrid
system has started. It turns off when the
hybrid system has been turned off.
CAUTION
If the Hybrid READY Indicator Light
does not illuminate when the engine
has been started, have your vehicle
checked at a SUBARU dealer.
& Hybrid Fail Lamp
S03AE71
The indicator illuminates when a malfunc-
tion occurs in the hybrid system. Contact
your SUBARU dealer immediately for an
inspection.
& Hybrid Battery Charge
Mode indicator
S03AEA0
When in the Hybrid Battery Charge Mode,
this indicator illuminates. For details about
the Hybrid Battery Charge Mode, refer to
“Hybrid system operation mode” FP32.
& Hybrid Battery Save
Mode indicator
S03AEA7
When in the Hybrid Battery Save Mode,
this indicator illuminates. For details about
the Hybrid Battery Save Mode, refer to
“Hybrid system operation mode” FP32.
& EV (Electric Vehicle)
mode lamp
S03AEA1
This lamp illuminates in the following
cases.
. When driving only using the electric
motor power
. When the engine is automatically
stopped by the hybrid system
& Hybrid system overheat
warning light
S03AEA2
This warning light illuminates when the
temperature of the inverter with converter
assembly is high. Contact your SUBARU
dealer immediately for an inspection.
& Timer charging setting
indicator
S03AEA8
This indicator illuminates when Remote
Battery Charging Timer has been sched-
uled. For details how to set the charging
timer, refer to “Setting the Remote Battery
Charging Timer” FP65.
& Charge cable connec-
tion indicator
S03AEA9
This indicator illuminates when the charge
cable is connected to the vehicle.
& Engine hood open
warning light
S03AE98
The warning light illuminates if the engine
hood is not fully closed. This function is
effective even if the ignition switch is in the
“OFF” or “ACC” position, or the key is
removed from the ignition switch.
Always make sure this light is not illumi-
nated before you start to drive.
& Coolant temperature
high warning light
S03AE48
CAUTION
. After turning the ignition switch
to the “ON” position, if this warn-
ing light behaves in any of the
following ways, the electrical
system may be malfunctioning.
Contact your SUBARU dealer
immediately for an inspection.
Warning and indicator
194
Loading ...
Loading ...
Loading ...