Loading ...
Loading ...
Loading ...
(443,1)
北米Model "A1390BE-B" EDITED: 2019/ 10/ 4
WARNING
Do not use oil or grease on the wheel
studs or nuts when the new tire is
installed. This could cause the nuts
to become loose and lead to an
accident.
13. Turn the jack handle counterclockwise
to lower the vehicle.
14. Use the wheel nut wrench to securely
tighten the wheel nuts to the specified
torque, following the tightening order in the
illustration.
For the wheel nut tightening torque, refer
to “Tires” FP464. Never use your foot on
the wheel nut wrench or a pipe extension
on the wrench because you may exceed
the specified torque. Have the wheel nut
torque checked at the nearest automotive
service facility.
15. Store the jack, jack handle and wheel
nut wrench in their storage locations.
WARNING
Never place the tire to be replaced or
tire changing tools in the passenger
compartment after changing a new
tire. In a sudden stop or collisions,
loose equipment could strike occu-
pants and cause injury. Store the all
tools in the proper place.
11-16. Alloy wheels
S11BM
Alloy wheels can be scratched and da-
maged easily. Handle them carefully to
maintain their appearance, performance,
and safety.
. When any of the wheels are removed
and replaced for tire rotation or to change a
flat tire, always check the tightness of the
wheel nuts after driving approximately 600
miles (1,000 km). If any nut is loose,
tighten it to the specified torque.
. Never apply oil to the threaded parts,
wheel nuts, or tapered surface of the
wheel.
. Never let the wheel rub against sharp
protrusions or curbs.
. When wheel nuts, balance weights, or
the center cap is replaced, be sure to
replace them with genuine SUBARU parts
designed for alloy wheels.
. When stacking and storing removed
tires, place shock-absorbing material be-
tween the tires to protect the wheels from
becoming scratched.
Alloy wheels
441
11
Maintenance and service
Loading ...
Loading ...
Loading ...