Loading ...
Loading ...
Loading ...
(173,1)
北米Model "A1390BE-B" EDITED: 2019/ 10/ 4
Security indicator light
NOTE
. All doors and the rear gate will lock,
an electronic chirp will sound once, the
hazard warning flashers will flash once,
and the security indicator light will start
flashing rapidly.
. If any of the doors or the rear gate is
not fully closed, an electronic chirp
sounds five times and the hazard
warning flashers flash five times to
indicate that the doors (or the rear gate)
are not properly closed. When the
doors are closed, doors will automati-
cally lock.
5. Approximately 30 seconds later, the
system will enter surveillance state.
When the system is in surveillance state,
the security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has been
armed for surveillance.
NOTE
. The system can be armed even if the
windows and/or moonroof are open.
Always make sure that they are fully
closed before arming the system.
. The 30-second standby time can be
eliminated if you prefer. Have it per-
formed by your SUBARU dealer.
. If any of the following actions is
done during the standby period, the
system will not switch to the surveil-
lance state.
– Doors (including the rear gate)
are unlocked using the access key
fob.
– Doors (including the rear gate)
are unlocked using the keyless
access function.
– Any door (including the rear gate)
is opened.
– Push-button ignition switch is
turned to the “ACC” position.
& Disarming the system
S02AF05
Perform either of the following procedures.
. Briefly press a button (for less than 2
seconds) on the access key fob.
. Carry the access key fob and perform
either of the following procedures.
– Grip the front door handle.
– Press the rear gate opener button.
– Unlock using the PIN code access.
The flashing of the security indicator light
will then change slowly (once approxi-
mately every 3 seconds from twice ap-
proximately every 2 seconds), indicating
that the alarm system has been disarmed.
! Emergency disarming
S02AF0501
If you cannot disarm the system using the
access key fob (i.e. the transmitter battery
is too weak), you can disarm the system.
The system can be disarmed if you turn the
ignition switch from the “OFF” to the “ACC”
or “ON” position with an access key fob.
NOTE
If the access key fob battery is dis-
charged, perform the procedure de-
scribed in “Switching power status”
FP401. In such a case, replace the
battery immediately. Refer to “Repla-
cing battery of access key fob” FP457.
& Alarm system setting
S02AF11
To change the setting of your vehicle’s
alarm system for activation or deactiva-
tion, do the following.
– CONTINUED –
Alarm system
171
2
Keys and doors
Loading ...
Loading ...
Loading ...