Loading ...
Loading ...
Loading ...
(245,1)
北米Model "A1390BE-B" EDITED: 2019/ 10/ 4
the next time the ignition switch is
turned to the “OFF” position and the
hybrid system is restarted.
! How to change the headlight mode
manually
S03AH0702
Change to the low beam:
When you return the turn signal lever to the
center position, the high beam assist
function will turn off and the high beam
assist indicator light will turn off.
Change to the high beam:
When you turn the light control switch to
the “
” position, the headlight mode will
be changed to the high beam.
At this time, the high beam assist function
will turn off, the high beam assist indicator
will turn off and the high beam indicator
light will turn on.
NOTE
. After manually changing the head-
light mode to the high beam, if you turn
on the high beam assist function,
return the light control switch to the
“AUTO” position.
. When manually changing the head-
light mode to the high beam, if you turn
the light control switch to the “
”
position, the instrument panel illumina-
tion, parking lights, front side marker
lights, rear side marker lights, tail lights
and license plate lights will be on.
! Tips for the high beam assist sys-
tem
S03AH0703
. The high beam assist function recog-
nizes the conditions surrounding the ve-
hicle based on the brightness of illumina-
tion ahead of your vehicle, etc. Therefore,
the headlight mode may switch in some
situations that do not match to the driver’s
sense.
. A bicycle or cargo cycle may not be
detected.
. Under the following situations, the
brightness of ambient illumination may
not be detected correctly and the high
beam assist function may not work prop-
erly. As a result, the glare of the high beam
may disturb the oncoming vehicle or
vehicle ahead. Also, the low beam mode
may continue although there are no
oncoming vehicles and vehicles ahead.
In the such cases, change the headlight
mode manually.
– In bad weather (fog, snow, sand
storm, heavy rain, etc.).
– When the windshield glass is dirty or
fogged.
– When the windshield is cracked or
damaged.
– When the stereo camera is de-
formed or the stereo camera lenses
are dirty.
– If there are lights similar to the
headlights or the tail lights in the
surrounding area.
– An oncoming vehicle or vehicle
ahead is driven without its headlights
and tail lights on.
– If the headlights of an oncoming
vehicle or the tail lights of a vehicle
ahead are dirty or discolored, or if the
light beams are not aimed correctly.
– A rapid change of brightness con-
tinues while driving.
– Driving on a road with many ups and
downs or uneven surfaces.
– Driving on a road with many curves.
– There are some objects that reflect
light strongly, such as a road sign or a
mirror in vehicle ahead.
– The rear part of the vehicle ahead,
such as a container, reflects light
strongly.
– The headlights of your vehicle are
damaged or dirty.
– Your vehicle is tilted, such as in case
the vehicle has a flat tire or is being
towed.
– Immediately after the hybrid system
has started.
. In the following conditions, the head-
light mode will not be automatically chan-
– CONTINUED –
Light control switch
243
3
Instruments and controls
Loading ...
Loading ...
Loading ...