Loading ...
Loading ...
Loading ...
20
To clean oven cavity surfaces:
To avoid damage to oven cavity surfaces, do not use soap-filled
scouring pads or abrasive cleaners. The oven cavity should be
cleaned at regular intervals, especially if spillovers have occurred.
Cleaning Method:
■ Steam Cleaning Function: See “Steam Cleaning” in the
“Maintenance Functions” section.
■ To clean the oven cavity surfaces (including the oven cavity
ceiling), remove the wire shelf and shelf supports and wipe
the interior of the oven and the shelf supports clean. See the
“Shelf Supports” section.
ACCESSORIES
Cleaning Method:
■ The following accessories are dishwasher safe: wire shelf,
baking/drip tray, steam tray and shelf supports.
■ Remove the water pipe from the water container for easy
cleaning. Soak the water pipe in water with liquid detergent.
The water pipe is not dishwasher safe.
■ Use a sponge with a mild detergent to clean the water
container. The water container is not dishwasher safe.
NOTE: Remove, empty and dry the water container after
each use.
■ Soak the seals and rings from the light bulb assembly in
water with liquid detergent. The seals and rings are not
dishwasher safe.
■ Wipe the temperature probe clean with a clean, damp cloth
or paper towel with mild detergent and water after use. Do
not immerse the temperature probe in water when cleaning.
To avoid scratching the surface, do not use steel-wool pads.
Shelf Supports
The shelf supports can be removed to better clean the oven
cavity walls.
To Remove Shelf Supports
1. Pull the shelf support toward the front of the oven.
2. Unhook the shelf supports from the oven cavity wall hooks.
3. Repeat steps 1 - 2 with the other shelf support.
To Replace Shelf Supports
1. Slide the shelf support onto the oven cavity wall hooks and
push toward the back of the oven.
2. Repeat Step 1 with the other shelf support.
Oven Light
The oven light is a 12-volt, 10-watt maximum, type G4 heat-
resistant halogen bulb.
To Replace the Oven Light:
Before replacing the bulb, make sure the oven is off and cool.
1. Disconnect power.
2. Turn the glass cap counterclockwise to unscrew.
3. Remove the seals and metal ring and clean the glass cap.
4. Replace bulb using a tissue or wearing cotton gloves to
handle bulb. To avoid damage or decreasing the life of the
new bulb, do not touch bulb with bare fingers.
5. Replace the bulb into bulb holder, metal ring and seals to the
glass cap.
6. Replace the oven light assembly to the oven cavity by turning
it clockwise.
7. Reconnect power.
A. Shelf support
B. Oven cavity wall hook
B
A
A. Oven cavity wall hook
B. Shelf support
A. Glass cap
A. Glass cap
B. Seals
C. Metal ring
D. Halogen bulb
A
B
A
A
B
C
D
Loading ...
Loading ...
Loading ...