Sony FL-N01 User Manual

Loading ...

Help Guide

Future Lab Program N

FL-N01

The computer does not recognize FL-N01.

Check that FL-N01 is turned on.

Check that the operating system of your computer is supported by FL-N01.

If the remaining battery level of FL-N01 is low, charge the battery. FL-N01 will not be turned on for 10 seconds after starting

to charge the battery. Wait for 10 seconds to turn FL-N01 on.

Check that the micro-USB cable is connected to FL-N01 and the computer firmly.

Check that FL-N01 and the computer are directly connected, not via a USB hub.

Press and hold the

(power) button for 16 seconds to force shutdown of FL-N01 and turn it on again. Then check the

following to synchronize the time setting of FL-N01 with the “Future Lab Program N” app.

Open the status screen of the “Future Lab Program N” app and check if FL-N01 and your smartphone are connected via

Bluetooth.

If there is no Bluetooth connection established between FL-N01 and your smartphone, connect them via Bluetooth again.

See “If FL-N01 does not operate properly” on “Precautions,” then initialize FL-N01 as follows.

Press and hold the

(power) button for 16 seconds to force shutdown of FL-N01, then press and hold the (power) and

volume - buttons simultaneously for more than 10 seconds until FL-N01 vibrates. The indicator light flashes for about 10

minutes then FL-N01 turns off. All data such as music files and photos are deleted, and FL-N01 is reset to the factory

settings.

If the same problem occurs repeatedly, there may be a malfunction.

After FL-N01 is initialized, follow all the procedures of Initial Setup of the “Future Lab Program N” app.

144

Loading ...

Sony FL-N01