Loading ...
Loading ...
Loading ...
work correctly depending on the features or specifications of the device.
While talking on the phone hands free, noise may occur depending on the device or communication environment.
Depending on the device to be connected, it may require some time to start communications.
Note on static electricity
Static electricity accumulated in the body may cause mild tingling. To minimize the effect, wear clothes made from natural
materials.
On photos and copyright
You should only take photos in environments where you are permitted to do so.
You should always get permission from your subject before taking photos.
Various countries have laws regulating taking photos of people or things. It is your responsibility to make sure you comply with
the applicable laws when using FL-N01.
Television programs, films, videotapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
No compensation for damaged content or recording failure
Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera,
recording media, etc.
If FL-N01 does not operate properly
Reset FL-N01 as follows.
Press and hold the
(power) button for 16 seconds to force shutdown of FL-N01 and turn it on again. Then check the
following to synchronize the time setting of FL-N01 with the “Future Lab Program N” app.
Open the status screen of the “Future Lab Program N” app and check if FL-N01 and your smartphone are connected via
Bluetooth.
If there is no Bluetooth connection established between FL-N01 and your smartphone, connect them via Bluetooth again.
If the problem persists even after the resetting operation above, initialize FL-N01 as follows.
Press and hold the
(power) button for 16 seconds to force shutdown of FL-N01, then press and hold the (power) and
volume - buttons simultaneously for more than 10 seconds until FL-N01 vibrates. The indicator light flashes for about 10
minutes then FL-N01 turns off. All data such as music files and photos are deleted, and FL-N01 is reset to the factory
settings.
A: Volume - button
B:
(power) button
After FL-N01 is initialized, follow all the procedures of Initial Setup of the “Future Lab Program N” app.
Note on wireless network function
We assume no responsibility whatsoever for any damage caused by unauthorized access to, or unauthorized use of,
104
Loading ...
Loading ...
Loading ...