Loading ...
Loading ...
Loading ...
54
EN
Management
Update
Update performs an update of the device's rmware.
To update the rmware, you need to install “Pioneer Cycle •
Cloud Connect” application on your PC. For information
about how to install and use the “Pioneer Cycle Cloud
Connect” application, refer to the SGX-CA900 support page.
[For American Users]
http://www.pioneerelectronics.com
[For Canadian Users (ENGLISH)]
http://www.pioneerelectronics.ca/POCEN/Support
[For Canadian Users (FRENCH)]
http://www.pioneerelectronics.ca/POCFR/Soutien
[For European Users]
http://www.pioneer.eu/eur/support/page.html
Charge the device before the update. If the device is not •
charged fully, the message appears and the update cannot
be performed.
If the device is logging, stop logging and save the log data •
before the update.
Checking the Firmware Version
Before updating the rmware, use the procedure below to
check the device's current rmware version.
1
On the home screen, tap the [Settings] icon.
This displays the settings menu.
2
Tap [System] and then check the number under
[Firmware Version].
Updating the Firmware
You can update the device’s rmware by transferring update
data from the server to the device.
1
If the device is connected to the PC with the
USB cable, disconnect it.
2
On the home screen, tap the [Settings] icon.
The settings menu is displayed.
3
Tap [System] - [Firmware Update].
The message that conrms to save settings and rmware
update will appear.
4
Tap [OK].
The backup data is created automatically and update
mode is activated.
The device’s entire screen becomes white in update mode.•
5
Activate the update software from your PC.
6
Connect the device to your PC.
Use the provided USB cable to connect the device to
your PC.
For information about connections, refer to “Charging the •
Device” under “Charging” (
Ü
page 6).
7
SelectthermwarebyPCupdatesoftwareand
start to update.
The message will appear on PC update software when
the update is completed.
The update process may take some time. Do not disconnect •
the USB cable from the PC or move on to the next step until
the update success message appears as this may cause a
malfunction.
Loading ...
Loading ...
Loading ...