Loading ...
Loading ...
Loading ...
46
EN
Settings
Cyclocomputer Settings
Logging
Use the settings below to congure the logging operation.
Settings marked with an asterisk (*) are initial factory defaults.
Setting Item Description
Auto Pause/Resume Enable* or disable Auto Pause/Resume.
Select the check box to enable Auto Pause/Resume.
Ü
Auto Pause/Resume Settings (page 23)
Trigger Threshold Specify the Auto Pause/Resume speed threshold value.
Logging Interval Specify the logging interval.
Specifying [Auto] causes the logging interval to be adjusted automatically within a range 1 to
10 seconds in accordance with riding speed.
Auto•
1 sec*•
3 sec•
5 sec•
10 sec•
Bike Select
Use the setting below to change the bike being used.
Setting Item Description
(Bike name) Change the bike being used. The device can have up to six bikes registered to it.
If the bike is changed, the registered sensor setting will also change automatically. When you change the bike, make sure that the •
sensor is connected with the device.
Bike Edit
Use the settings below to register and edit bike information.
Correctly congured bike information is required in order to obtain accurate data.•
The device can have up to six bikes registered to it. You can use the procedure under "Bike Select" (•
Ü
page 46) to change to one of the
registered bikes.
The riding distance and time of the bike are added automatically after this setting.•
Setting Item Description
Bike 1,
Bike 2,
Bike 3
Bike 4,
Bike 5,
Bike 6
Sensors Edit sensors connected to bike.
Ü
Sensor Settings (page 48)
Wheel Circumference Specify the bike wheel circumference.
Total Distance Bike Specify the bike riding distance.
Total Time Bike Species total time ridden on each bike.
Name Specify the name of the bike.
Weight Specify the weight of the bike.
Crank Length Specify the crank length.
Saddle Height Specify the saddle height.
Saddle Setback Specify the saddle setback.
Stem Length Specify the stem length.
Handlebar Position Specify the handlebar position.
Frame Size Specify the frame size.
Chainrings Specify the chain ring size.
Sprocket Specify the number of sprocket teeth.
Wheel Specify the wheel type.
Loading ...
Loading ...
Loading ...