Loading ...
Loading ...
Loading ...
14
INSTALLATION INSTRUCTIONS
WARNING!
●
This appliance is heavy and requires two persons for unpacking and installation.
●
Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards.
IMPORTANT!
●
Wear gloves to protect against sharp edges.
●
When planning the cutout for the downdraft unit:
– Draw both the cooktop and downdraft unit cutouts on the countertop before
making any cuts.
– Check that there is enough room in the cabinet for both the cooktop and
the downdraft unit. Failure to follow these warnings could result in damage
to the countertop.
●
To avoid damage to motor bearings and impellers, keep drywall spray, construction
dust, etc. away from the blower.
The manufacturer is not liable for any damage caused by not following these instructions.
1
Preparing for installation
Before installing your downdraft vent system:
●
Please read the instructions carefully.
●
Unpack the downdraft unit and place on a flat protected surface.
●
Ensure the voltage (V) and the frequency (Hz) indicated on the serial plate match
the voltage and frequency of the installation site.
●
Check that the area around the installation area is clear of any electrical cables and
pipesetc.
●
Be aware of kitchen cabinets and splash backs in the area of the downdraft vent
system and the cooktop. Ensure that the area where the downdraft unit rises is
free of obstacles. Also be aware performance may be reduced by strong drafts
from windows or doors etc.
●
The downdraft unit surfaces can be damaged during installation if grazed or
knocked by tools. Please take care to protect the surfaces during installation.
●
Temporarily mark the center of the cooktop according to the information given
in the ‘Installation instructions – Cabinet cutout dimensions’ section.
●
The downdraft unit is installed directly behind the cooktop. For easiest installation,
install the downdraft vent system first, then the cooktop.
●
Remove any cardboard packaging from within the blower impeller.
Loading ...
Loading ...
Loading ...