Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 36
Additional Program Options
The following opons can be used to set user preferences.
LOCKOUT BRUSH PRE - - For disc brush decks only, it is possible to lock out either the Low or High Brush Pressure seng.
During normal operaon the pressure seng(s) that are locked out will not be able to be selected.
• NONE
• LOW
• HIGH
To change the seng:
1. Scroll through the menu using the Soluon Increase and Decrease switches unl you get to the desired value.
2. To save and go back to the main menu, press the scrub ON/OFF switch.
LOCKOUT SOL FLOWS - - It is possible to lock out any one or more of the Soluon Flow Rate sengs. During normal op-
eraon, the ow rate(s) that are locked out will not be able to be selected.
• NONE
• LOW
• MEDIUM
• HIGH
• LOW & MEDIUM
• LOW & HIGH
• MEDIUM & HIGH
To change the seng:
1. Scroll through the menu using the Soluon Increase and Decrease switches unl you get to the desired value.
2. To save and go back to the main menu, press the scrub ON/OFF switch.
RECOVER TANK FULL - – It is possible to enable or disable the Recovery Tank Full automac shuto feature. Enable
means that the automac shuto feature is turned on. The system will shut o the vacuum motor if it senses the tank
is full. Disable means that the automac shuto feature is turned o. The system will not automacally shut o the
vacuum motor if it senses the tank is full.
• ENABLED
• DISABLED
To change the seng:
1. Scroll through the menu using the Soluon Increase and Decrease switches unl you get to the desired value.
2. To save and go back to the main menu, press the scrub ON/OFF switch.
Loading ...
Loading ...
Loading ...