Loading ...
Loading ...
Loading ...
Changing Incline
Press the Incline keys to change the elevation in increments of ½% increments up to 10%, then 1% up
to 20%. Press multiple times to change incline setting or hold the key to auto-repeat. Elevation is defined
as the ratio of rise or fall over run of the treadmill deck.
Changing between active mode or workouts
You can make changes during your workout. Press WORKOUTS to select another workout, Manual to
select Manual Mode, or Goal to change your Time, Distance, or Calorie Goal. Follow screen prompts
to begin the new workout.
Limits of high speed and high incline
The software is designed to limit a user from operating at maximum speed and maximum incline at the
same time. If the target speed is above 6.0 mph (9.6 kph), the maximum incline is limited to 15%. If the
target incline is set to 15% or greater, the maximum speed is limited to 6.0 mph (9.6 kph).
Quick Operation Guide
The following is a quick overview of the operation. For more information see Detailed Operation Guide.
Maximum user weight is 400 lbs. (181 kg).
Falling hazard. When starting unit
• Stand on two top steps.
• Do not stand on belt.
1. Place your feet on the two top steps located on each side of the running belt.
2.
Clip the e-stop clip onto your clothing and test it as described under Emergency Stop in the Safety
chapter.
3. Tap Quick Start on the CardioTouch screen.
The treadmill begins a countdown, 3...2...1, after which it accelerates the belt to 0.5 mph (0.8 kph)
and enters Active Mode.
Page 56 of 105
Cybex 790T Treadmill Part Number LT-24467-4 E
Loading ...
Loading ...
Loading ...