Loading ...
Loading ...
Loading ...
Installation
27
11. Connect main console harness to keyed connector routed
through upright assembly. Connect keyed contact heart
rate harness to wires from console. Route wires away from
both raised surfaces on mounting plate.
Figure 2-10. Connecting Console Harness
12. Attach console to upright mounting plate: hold console
securely in place with one hand and attach to underside of
mounting plate using (2) M6x60 black hex head bolts, black
flat and spring washers (rear) and (2) M6x55 zinc hex head
bolts, zinc flat and spring washers (front).
Figure 2-11. Attaching Console
Stud
Heart Rate
Harness
Stud Receptacle In
Mounting Plate
Main
Console
Harness
Console Assembly
M6 Split Washer
M6 Flat Washer
M6x60 Hex Head Screw
(black oxide, rear)
M6x55 Hex Head Screw
(zinc coated, front)
Loading ...
Loading ...
Loading ...