Loading ...
Loading ...
Loading ...
Installation
66
Water intake
The washing machine can be con-
nected to a portable water supply. A
non-return valve is not needed unless
required by building code.
The washing machine has ½“ (13 mm)
pressure hoses with ¾” (19 mm) female
hose thread connections. If there is no
water hookup, contact a plumber to in-
stall a connection. Make sure that the
sealing ring is seated properly on the
hose connector.
Replace the hose only with a genuine
Miele hose, or with a hose able to with-
stand up to 145 psi (10.000 kPa) pres-
sure. The water valve connector must
also be able to withstand 145 psi
(10.000 kPa).
The bolted connection is under
water pressure. Open the water sup-
ply slowly to check for leaks. Adjust
the rubber seal and the bolted con-
nection if necessary.
To protect the inlet valve, the two fil-
ters (one at the pressure hose / valve
connection and one at the inlet con-
nection to the solenoid valve) must
not be removed.
Maintenance
Only use a genuine Miele hose that has
been tested to withstand pressure of at
least 1,015psi (7,000kPa) should you
ever need a replacement.
A filter is located in the open end of
the inlet hose and another in the in-
take point to protect the inlet valve.
Neither filter may be removed.
Loading ...
Loading ...
Loading ...