Loading ...
Loading ...
Loading ...
Frequently asked questions
45
The program is canceled and a fault indicator light lights up on
the control field
Problem Possible cause and solution
The fault indicator light
lights up, and ap-
pear alternately on the
time display, and the
buzzer sounds.
The water intake is blocked or restricted.
Check whether the water supply is turned on prop-
erly.
Check whether the intake hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water intake is blocked.
Clean the filter.
The fault indicator light
lights up, and ap-
pear alternately on the
time display, and the
buzzer sounds.
The drain is blocked or restricted.
The drain hose has been fixed too high.
Clean the filter and the pump.
The maximum drain height is 1m.
The fault indicator light
lights up, and
appear alternately on
the time display, and
the buzzer sounds.
The water protection system has reacted.
Close the water supply.
Contact Technical Service.
and appear alter-
nately on the time dis-
play and the buzzer
sounds.
There is a fault.
Disconnect the washing machine from the power
supply, either by unplugging the machine or by
disconnecting it at the fuse.
Wait at least 2minutes before reconnecting the
washing machine to the electricity supply.
Then switch the washing machine on again.
Restart the program.
If the fault message appears again, contact Tech-
nical Service.
Loading ...
Loading ...
Loading ...