Loading ...
Loading ...
Loading ...
Up tp 20 SSIDs can be shown in the list.
When the SSID you want to connect does not appear in the list, check that the wireless router is turned on, then
turn off the speaker and repeat the procedure from step 3 above again. If you still cannot find your desired SSID,
input the SSID directly into [Wireless Settings] in the window above.
8. Select [Apply].
9. Check that the LINK indicator lights up in orange.
When the Wi-Fi connection is completed, the LINK indicator lights up in orange. It may take more than a minute for
the LINK indicator to light up.
The connection is complete.
10. Connect the PC to the wireless router.
Hint
If you want to set a fixed IP address, set in the screen in step 6 above.
When the connection of the speaker to your Wi-Fi network has completed, connect your computer to the previous
destination or your wireless router.
Note
This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from
step 2.
Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after
setting the Wi-Fi security.
When you connect the speaker to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby
function is turned on automatically.
Related Topic
178
Loading ...
Loading ...
Loading ...