Loading ...
Loading ...
Loading ...
5
• Do not use this saw to cut tree limbs
or logs.
• Never use blades recommended for
operation at less than 5000 RPM.
• Do not use this saw to cut ber cement
board. This miter saw is not intended to
cut ber cement board.
Additional warnings are
listed throughout this manual. Please
review all before operating this power
tool.
• ADDITIONAL INFORMATION
regarding the safe and proper operation
of power tools (i.e., a safety video) is
available from the Power Tool Institute,
1300 Sumner Avenue, Cleveland, OH
44115-2851 (www.powertoolinstitute.
com). Information is also available
from the National Safety Council, 1121
Spring Lake Drive, Itasca, IL 60143-
3201. Please refer to the American
National Standards Institute ANSI 01.1
Safety Requirements for Woodworking
Machines and the U.S. Department of
Labor OSHA 1910.213 Regulations.
Do not connect unit to
electrical power source until complete
instructions are read and understood.
Always wear proper
personal hearing protection that
conforms to ANSI S12.6 (S3.19) during
use. Under some conditions and duration
of use, noise from this product may
contribute to hearing loss.
NEVER MAKE ANY CUT
UNLESS THE MATERIAL IS SECURED
ON THE TABLE AND AGAINST THE
FENCE.
WARNING
!
WARNING
!
WARNING
!
WARNING
!
PROPOSITION 65 WARNING
WARNING
!
Drilling, sawing, sanding
or machining wood products can
expose you to wood dust, a substance
known to the State of California to
cause cancer. Avoid inhaling wood
dust or use a dust mask or other
safeguards for personal protection.
For more information go to:
www.P65Warnings.ca.gov/wood
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and
cement and other masonry products,
and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are
specially designed to lter out microscopic
particles.
Handling the power cord on this product
may expose you to chemicals known to
the state of California to cause cancer and
birth defects or other reproductive harm.
Wash hands after handling.
For more information go to
www.65Warnings.ca.gov
WARNING
!
Use of this tool can
generate and/or disperse dust, which
may cause serious and permanent
respiratory or other injury. Always use
NIOSH/OSHA approved respiratory
protection appropriate for the dust
exposure. Direct particles away from face
and body.
• Wear appropriate hearing protection
during use. Under some conditions
and duration of use, noise from this
product may contribute to hearing loss.
WARNING
!
ALWAYS use safety
glasses. Everyday eye glasses are NOT
safety glasses. Also use face or dust
mask if cutting operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA
Z94.3),
• ANSI S12.6 (S3.19) hearing
protection,
• NOSH/OSHA respiratory protection.
Loading ...
Loading ...
Loading ...