Loading ...
Loading ...
Loading ...
12
ASSEMBLY AND
ADJUSTMENTS
• To avoid injury, do not connect this
miter saw to the power source until
it is completely assembled and
adjusted, and you have read and
understood this Instruction Manual.
• To reduce the risk of injury, turn
unit off and disconnect it from
power source before installing
and removing accessories, before
adjusting or when making repairs.
An accidental start-up can cause
injury.
TRANSPORTING THE SAW (FIGURE A)
• To reduce the risk of injury, turn unit
off and disconnect it from power
source before installing and removing
accessories, before adjusting or
when making repairs. An accidental
start-up can cause injury.
• To reduce the risk of serious
personal injury, ALWAYS lock the
miter table locking lever, bevel lock
handle, and hold-down latch before
transporting saw.
• In order to conveniently carry the miter
saw from place to place, use the hand
holds (1) on the base.
RELEASING THE CUTTING HEAD
(FIGURE B)
To avoid injury and
damage to the saw, transport or store
the miter saw with the cutting head
locked in the down position. Never
use the hold-down latch to hold the
cutting head in a down position for
cutting operations.
WARNING
!
WARNING
!
WARNING
!
A
1
TOOLS NEEDED TO REMOVE
OR INSTALL BLADE
Adjustable Wrench
Combination Square
Not Supplied
Supplied
TOOLS NEEDED FOR
ADJUSTMENT
Blade Wrench with
Phillips Head End and
6 mm Hex Head End
Loading ...
Loading ...
Loading ...