Loading ...
Loading ...
Loading ...
42
US
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DIST
ORTION:
(FTC)
Front L + Front R:
With 8 ohms loads, both channels
driv
en, from 200 - 20,000 Hz; rated
18 W per channel minimum RMS
po
wer, with no more than 1% total
harmonic distortion from 250 mW to
rate
d output.
POWER OUTPUT (reference)
Front L/Front R/Center: 90 W (per
chan
nel at 8 ohms, 1 kHz)
Subwoofer: 180 W (at 4 ohms, 100 Hz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 50 W + 50 W
(at 8 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R/Center: 90 W (per
ch
an
nel at 8 ohms, 1 kHz)
Subwoofer: 180 W (at 4 ohms, 100 Hz)
Inputs
TV IN (OPTICAL)
USB
ANALOG IN
Output
HDMI OUT (TV (ARC))
HDMI Section
Connector
Type A (19pin)
USB section
(USB) port:
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.0
Output
BLUETOOTH Specification Power
Class 1
M
aximum communication range
Line of sight approx. 10 m
1)
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GH
z)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribution
Prof
ile)
AVRCP (Audio Video Remote Control
Prof
ile)
Supported Codec
3)
SBC
4)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32 kHz
, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
Speaker section
Speaker system
Subwoofer system, Bass reflex
Speaker
160 mm (6 3/8 in) cone type
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 55 W
Standby mode: 0.5 W or less (Power
Savi
ng mode)
(When [CONTROL FOR HDMI] in [HDMI]
and
[STANDBY] in [BT] are set to [OFF])
Standby mode: 2 W or less*
(When [CONTROL FOR HDMI] in [HDMI]
and
[STANDBY] in [BT] are set to [ON])
Additional Information
Subwoofer (SA-WS40R)
Loading ...
Loading ...
Loading ...