Loading ...
Loading ...
Loading ...
68 GETTING TO KNOW YOUR INSTRUMENT PANEL
INSTRUMENT CLUSTER DISPLAY
C
ONTROL BUTTONS
The system allows the driver to select
information by pushing the following buttons
mounted on the steering wheel:
Instrument Cluster Display Control Buttons
The instrument cluster display features a driver
interactive display that is located in the
instrument cluster. Pushing the controls on the
left side of the steering wheel allows the driver
to select vehicle information and Personal
Settings.
Push the up arrow button to scroll upward
through the main menus and submenus
(Speedometer, Trip, Drive Mode Selector,
Vehicle Info, Driver Assist, Audio, Phone,
Navigation, Messages, Settings).
Push the down arrow button to scroll
downward through the main menu and
submenus (Speedometer, Trip, Drive Mode
Selector, Vehicle Info, Driver Assist, Audio,
Phone, Navigation, Messages, Settings).
Push the right arrow button to access the
information screens or submenu screens of a
main menu item.
Push the back/left arrow button to access
the information screens or submenu screens
of a main menu item.
Push the OK button to access/select the
information screens or submenu screens of a
main menu item. Push and hold the OK
button for two seconds to reset displayed/
selected features that can be reset.
ENGINE OIL CHANGE RESET — IF
E
QUIPPED
Your vehicle may be equipped with an engine oil
change indicator system. The “Change Engine
Oil” message will display in the instrument
cluster display. The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to
display each time you turn the ignition switch to
the ON/RUN position. To reset the oil change
indicator system (after performing the
scheduled maintenance), refer to the following
procedure.
1. Turn the ignition switch to the ON position
(do not start the engine).
2. Fully push the accelerator pedal slowly,
three times, within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
21_FD_OM_EN_USC_t.book Page 68
Loading ...
Loading ...
Loading ...