Loading ...
Loading ...
Loading ...
140 MULTIMEDIA
Blind Spot Assist — If Equipped
When the “Blind Spot Assist” feature is selected, the Blind Spot Monitor
(BSM) system is activated and shows a visual alert in the outside mirrors,
or it shows a visual alert in the outside mirrors and sounds an audible
alert when the turn signal is on. When “Off” is selected, the BSM system
is deactivated. If your vehicle has experienced any damage in the area
where the sensor is located, even if the fascia/bumper is not damaged,
the sensor may have become misaligned. Take your vehicle to an
authorized dealer to verify sensor alignment. A sensor that is misaligned
results in the BSM not operating to specification.
Rear View Camera Delay
The “Rear View Camera Delay” setting determines whether or not the
screen displays the rear view image with dynamic grid lines for up to
10 seconds after the vehicle is shifted out of REVERSE. This delay is
canceled if the vehicle’s speed exceeds 8 mph (13 km/h), the
transmission is shifted into PARK, or the ignition is switched to the OFF
position.
Active Rear View Camera Guidelines
The “Active Rear View Camera Guidelines” feature overlays the Rear View
Camera image with active, or dynamic, grid lines to help illustrate the
width of the vehicle and its projected backup path, based on the steering
wheel position when the option is checked. A dashed center line overlay
indicates the center of the vehicle to assist with parking or aligning to a
hitch/receiver.
Rain Sensing Wipers — If Equipped This setting will allow you to turn the rain sensing wipers on or off.
Setting Name Description
21_FD_OM_EN_USC_t.book Page 140
Loading ...
Loading ...
Loading ...