Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 47
Driver And Passenger Temperature Knobs
The passenger temperature knob provides the
passenger with independent temperature
control. The driver temperature knob provides
the driver with independent temperature
control. Rotate the adjustment knob to set the
desired temperature.
Rotating the temperature knob
clockwise increases the temperature.
Rotating the temperature knob
counterclockwise decreases the
temperature.
The set temperature is shown on the display.
Turning the temperature knob completely in
one direction or the other activates the HI
(maximum heating) or LO (maximum cooling)
functions shown in the display, respectively.
Rotate the driver temperature knob fully
counterclockwise for maximum A/C (LO).
To deactivate these functions, turn the
temperature knob to the desired temperature.
NOTE:
Rotating the passenger temperature control
knob while in Sync mode will automatically exit
Sync.
Blower Control Knob
Blower Control is used to regulate the
amount of air forced through the
Climate Control system. Adjusting the
blower will cause automatic mode to switch to
manual operation. The speeds can be selected
by rotating the Blower Control adjustment knob.
Mode Control
Select Mode by pressing one of the
Mode buttons to change the airflow
distribution mode. The airflow
distribution mode can be adjusted so
air comes from the instrument panel outlets,
floor outlets, defrost outlets and demist outlets.
Front Defrost Button
Push and release the button on the
faceplate to change the current
airflow setting to Defrost mode. The
Front Defrost indicator illuminates
when Front Defrost is on. Air comes from the
windshield and side window demist outlets.
When the defrost button is selected, the blower
level may increase. Use Defrost mode with
maximum temperature settings for best
windshield and side window defrosting and
defogging. When toggling the front defrost
mode button, the Climate Control system will
return to the previous setting.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
2
21_FD_OM_EN_USC_t.book Page 47
Loading ...
Loading ...
Loading ...