Loading ...
Loading ...
Loading ...
58 GETTING TO KNOW YOUR VEHICLE
Reset Auto-Up
Should the Auto-Up feature be interrupted and
stop working, the feature will need to be reset.
To reset Auto-Up:
1. Pull the window switch up to close the
window completely and continue to hold
the switch up for an additional two seconds
after the window is closed.
2. Push the window switch down firmly to open
the window completely and continue to hold
the switch down for an additional two
seconds after the window is fully open.
NOTE:
All doors must be closed before beginning the
Auto-Up reset procedure.
Window Lockout Switch
The window lockout switch on the driver's door
trim panel allows you to disable the window
controls on the rear passenger doors. To
disable the window controls, push and release
the window lockout button (the indicator light
on the switch will turn on). To enable the window
controls, push and release the window lockout
switch again (the indicator light on the switch
will turn off).
Window Lockout Switch
Wind Buffeting
Wind buffeting can be described as the
perception of pressure on the ears or a
helicopter-type sound in the ears. Your vehicle
may exhibit wind buffeting with the windows
down, or the sunroof (if equipped) in certain
open or partially open positions. This is a normal
occurrence and can be minimized. If the
buffeting occurs with the rear windows open,
open the front and rear windows together to
minimize the buffeting. If the buffeting occurs
with the sunroof open, adjust the sunroof
opening to minimize the buffeting or open any
window.
SUNROOF — IF EQUIPPED
The sunroof has two glass panels (the front one
is operational and the rear one fixed) and is
equipped with two manual operated
sunshades, front and rear.
The power sunroof can be operated only when
the ignition is placed in ON/RUN.
The power sunroof switches are located in the
overhead console.
WARNING!
There is no auto-reverse protection when the
window is almost closed. To avoid personal
injury be sure to clear your arms, hands,
fingers and all objects from the window path
before closing.
21_FD_OM_EN_USC_t.book Page 58
Loading ...
Loading ...
Loading ...