Loading ...
Loading ...
Loading ...
23
ENCLEANING & MAINTENANCE
WARNING: Do not attempt to clean your deep fryer or drain the oil
while either the deep fryer or the oil is hot. Allow unit to completely
cool.
1. Before cleaning, unplug the breakaway cord from the wall outlet first,
and then from your deep fryer and wait for the deep fryer to cool
completely.
2. Remove the control panel with heating element from the housing by
lifting vertically.
3. Never immerse the control panel in any liquid. Clean the heating
element with hot, soapy water, being careful not to wet the control
panel.
4. Clean the exterior of the control panel with a slightly damp cloth.
5. Wash frying baskets, and oil container in warm, soapy water and dry
thoroughly or in the dishwasher.
6. Wipe the deep fryer housing with a damp cloth. Always ensure that
all components are dried thoroughly, as any residual water will cause
splattering of oil.
IMPORTANT: Do not immerse the deep fryer control panel or
breakaway power cord in water or other liquid. Always hand wash as
described above and dry thoroughly. Any other servicing should be
performed by an authorized service representative.
RESET FUNCTION
• Your appliance is equipped with an overheating security feature located
below the control panel (fig 6).
• If you use your fryer without oil, the safety cut-off is activated and the
appliance will shut off automatically.
• In this case, unplug the appliance and let it cool (about 10 minutes).
• After the bowl has been filled with oil, plug the appliance in. Then press
the safety cut-off RESET button with a toothpick or similar nonmetallic
object.
• If the problem with the safety cut-off persists, please contact our
Helpline (see details on page 29).
Loading ...
Loading ...
Loading ...