Loading ...
Loading ...
Loading ...
06 During your journey
Cargo area
06
296
* Option/accessory, for more information, see Introduction.
G018368G018369
Position the handle in fitting position, see
illustration. Press gently on the handle to
enable it to be turned into position, see
arrow.
Press the strut in towards the grille and
align the grille in the roof mounting.
Turn the handle 90° . Press gently as in
the illustration (1) if necessary. Secure the
grille by angling the handle 90°
.
•
Removal of the grille takes place in reverse
order.
Cargo cover*
G017749
Pull the cargo cover over the load and hook it
into the recesses at the cargo area's rear posts.
IMPORTANT
The safety grille cannot be folded up or
down when the cargo cover is fitted.
Attaching the cargo cover
Move one end piece of the cover into the
recess on the side panel.
Move the other end piece into the corres-
ponding recess.
Press both sides in. A "click" should be
audible and the red marking should disap-
pear.
> Check that both end pieces are locked.
Removing the cargo cover
1. Press in one end piece button and lift it out.
2. Carefully angle the cover up/out and the
other end piece loosens automatically.
Lowering the cargo cover's rear sealing
disc
In its rolled-in position, the cargo cover's rear
sealing disc protrudes horizontally into the
cargo area when it is fitted.
– Pull the sealing disc back gently, free from
its support shelves, and lower.
Loading ...
Loading ...
Loading ...