Loading ...
Loading ...
Loading ...
05 Infotainment system
RSE - Rear Seat Entertainment system*
05
268
* Option/accessory, for more information, see Introduction.
Battery replacement in wireless
headphones
The headphones are powered by two batteries
of the AAA model.
Take along extra batteries for a long journey.
Wireless headphones.
1. Unscrew the screw and detach the battery
cover.
2. Remove the used batteries, turn the new
batteries in accordance with the symbols
in the battery compartment and insert
them.
3. Fit the cover and screw in the screw.
Environmental care
Be sure to dispose of the exhausted batteries
in an environmentally safe manner.
Headphones socket
It is possible to connect external headphones
via the headphones socket (3.5 mm) on the
side of the head restraints, see the illustration
on page 266. The volume is controlled using
the remote control.
A/V-AUX input, Electrical socket 12 V
The input allows you to connect other equip-
ment. Always follow the instructions included
with the external equipment, or from the man-
ufacturer or reseller, when connecting. Equip-
ment connected via the A/V-AUX input can use
the TV screens, wireless headphones, head-
phones sockets and the car's speakers.
NOTE
The customer is responsible that equipment
connected to the A/V-AUX input or head-
phones socket does not cause interference
in the vehicle's RSE system.
Connection of A/V-AUX input
The A/V-AUX input is located under the armrest in
the tunnel console.
1. Connect the video cable to the yellow
socket.
2. Connect the left-hand audio cable to the
white socket and the right-hand one to the
red socket.
3. Connect the power cable to the electrical
socket if your equipment is designed for 12
V.
Always follow the instructions for the external
equipment when connecting.
There is a recess in the right-hand rear edge of
the tunnel console where cables can be routed
so that the hatch can be closed without cables
being pinched.
Loading ...
Loading ...
Loading ...