Loading ...
Loading ...
Loading ...
Cottons
3h01min
Washing
Will finish at 15:42
The drain pump can operate
shortly before the appliance
fills water.
2. If necessary, tap on to enter the
option list and activate the Child Lock
option. Refer to "Child Lock
" section
in the "Options" chapter.
The shortcut shows up. Keep
pressed for about three seconds to
deactivate the Child Lock.
Starting a program with
delay start
1. Touch the Start/Pause button to start
the programme.
The related led stops flashing and stays
on.
The door is locked.
The appliance starts the countdown and
the door is locked.
Cottons
1h29min
Finished at 15:36
Starts in
Reset
2. Tap on Reset to cancel the delay
start and then touch the Start/Pause
button or wait until the countdown is
completed.
The program will start normally.
The ProSense detection
starts at the end of the
countdown.
During the cycle, the display
will inform you about each
running phase (e.g. washing,
rinsing and so on).
14.9 The ProSense load
detection
After touching the Start/Pause button:
1. The ProSense starts the laundry load
detection to calculate the real
program duration. The display shows
the message Adjusting program to
current load.
The appliance adjusts automatically
the program duration to the load to
achieve perfect washing results in the
minimum possible time. The program
duration could increase or decrease.
2. After about 20 minutes the display
shows the new program duration, the
expected program time and advise
you about the running phase.
The ProSense detection is
carried out with complete
washing programs only.
14.10 Interrupting a program
and changing the options
When the program is running, you can
change only some options:
1. Touch the Start/Pause button .
The related led start flashing.
2. Tap on to change the options.
In the option list only the available
options will be active.
3. Touch the Start/Pause button again.
The washing program continues and the
program duration can change.
14.11 Cancelling a running
program
1. Press the On/Off button to cancel the
program and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
program.
www.aeg.com38
Loading ...
Loading ...
Loading ...