Loading ...
Loading ...
Loading ...
5.2 Accessories
1 2
45 3
1
Spanner
To remove the transit bolts.
2
Plastic caps
To close the holes on the rear side of
the cabinet after the removal of the
transit bolts.
3
Sound barriers
To decrease the noise while the
appliance operates.
4
Plastic hose guide
To connect the drain hose on the
edge of a sink.
5
Anti-flood inlet hose
To connect the appliance to the
water tap and to prevent possible
leakage.
5.3 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that the appliance
does not touch the wall or
other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the appliance is
installed on a plinth or a
tumble dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
5.4 The inlet hose
1. Connect the water inlet hose to the
cold water tap with 3/4" BSP thread.
If necessary, use a spanner.
www.aeg.com12
Loading ...
Loading ...
Loading ...