Loading ...
Loading ...
Loading ...
The weight sensor window pops up.
Cottons
0.0 kg
Ready to start
2. Shake the garments before you put
them in the drum.
3. Put the laundry in the drum, one item
at time.
On the display the weight of the laundry
is updated by steps of 0.5 kg and the
program duration is updated
accordingly when you return to the
program summary screen.
If you put in the drum more
laundry than the maximum
load, the display tells that
the suggested load has been
exceeded.
You can wash your laundry
anyway, but the water and
energy consumption
increase.
To have the best
consumption and washing
performance remove the
excess items.
The overload indication is
shown only in programs with
a maximum load lower than
the appliance maximum load.
4. Close the door. Make sure that no
laundry stays between the seal and
the door. There is a risk of water
leakage or damage to the laundry.
5. If you have already set Detergent
Type 1 or Detergent Type 2 with
average suggested dosage for the
type of detergent you are using , the
appliance recommends the detergent
quantity to pour.
Cottons
Detergent advice:
Type 1 / Type 2
60ml / 50ml
Ready to start
Refer to the "Detergent Dosing" section
in the chapter "Settings".
If you change the washing
program after closing the
door, the display may tell
you that the laundry is now
exceeding the maximum
recommended load for the
new program: open the door
and remove a few garments.
14.7 Filling the detergent and
additives
We recommend that you do
not exceed the maximum
indicated level ( ).
Please read "Detergents
type and quantity of
detergent" in "Hints and tips"
chapter.
1. Open the detergent dispenser.
M
ax
▼
M
a
x
▼
Ma
x
▼
Salt
2. Put the powder detergent in the
compartment
. If using liquid
www.aeg.com36
Loading ...
Loading ...
Loading ...