Loading ...
Loading ...
Loading ...
Use the hose supplied with
the appliance.
CAUTION!
Make sure that there are no
leaks from the couplings.
2. Connect the other end of the inlet
hose to the back of the appliance.
The hose can be turned in any
direction.
3. Position it toward left or right
depending on the position of the
water tap.
20º20º
45º45º
Make sure that the inlet hose
is not in vertical position.
4. If necessary, loose the ring nut to set
it in the correct position. Simply
loosen the fitting, rotate the hose and
retighten the fitting, making sure
there are no water leaks.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for purchasing a new,
longer hose specially
designed for this type of use.
5.5 Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing.
The red sector in the window «A» shows
this fault.
A
If this occurs, close the water tap and
contact the authorized service centre to
replace the hose.
5.6 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not
more than 100 cm from the floor.
You can extend the drain
hose to maximum 400 cm.
Contact the authorized
service centre for the other
drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose
guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when the
appliance drains.
ENGLISH 13
Loading ...
Loading ...
Loading ...