Loading ...
Loading ...
Loading ...
22
or press the INPUT Upp or Downq Push-button on
the Remote Control. Refer to figures 60, 62 and 63.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLUME Upp or Downq Push-buttons on the Re-
mote Control for the desired listening level. Refer to
figures 60 and 63.
Trim Functions
The C2700 has nine different Trim Selections with
Adjustments. The Trim Selections include Balance,
Power On and Off
The Red LED above the STANDBY/ON Push-button
lights to indicate the C2700 is in Standby mode.
To switch ON the C2700, press the STANDBY/ON
Push-button on the Front Panel or the (Power On)
Push-button on the Remote Control. Refer to page
9 for information about Switching Power On to the
C2700. After the C2700 goes through its startup, the
Front Panel Information Display indicates the last
used source and volume setting. This is followed by
the volume setting indication starting at zero and then
increasing to the last used volume setting. Refer to fig-
ures 60, 61, 62 and 63. To switch OFF the C2700 press
the STANDBY/ON Push-button on the Front Panel or
the OFF Push-button on the Remote Control.
Note: For an explanation of the Remote Control
Push-button functions, refer to pages 10 and 11.
Source Selection
Rotate the INPUT Control to select the desired source
Input Trim Level, Bass, Treble,
Tone Controls, Mono/Stereo
Mode, Amplifier Meter Lights,
Display Brightness, Phono
Cartridge (MC & MM) Loading
(when the Input is Selected) and
when Headphones are connected,
HXD Mode. The Trim Settings
are stored in memory indepen-
dently for each Input Source
Selected, except the Meter Illu-
mination and Display Brightness
settings of On or Off, which are
the same for all inputs.
Note: Selection and Adjustment of
all Trim Functions may be
performed by pressing the
Front Panel INPUT Trim
Control and then rotating
it to select the desired Trim
Function. Then use the
VOLUME Adjust Control to
change the setting. Remote
Control TRIM Push-Button
together with the LEVEL UP
/ LEVEL DN Push-button
may also be used. Refer to
figures 60 and 63.
BALANCE
Listening balance varies with
different program sources, room
acoustics and listening positions
relative to the Loudspeakers. Use
the Balance (Trim Function) as
needed to achieve approximately
equal listening volume levels in each Loudspeaker. To
adjust the Balance perform the following:
How to Operate the C2700
Figure 60
Figure 61
INPUT: BAL 1
15%
Figure 62
INPUT: MC PHONO
30%
Figure 63
USB 35%
DSD256
Loading ...
Loading ...
Loading ...