Loading ...
Loading ...
Loading ...
20
Factory Reset
If it becomes desirable to reset all the adjustable set-
tings (Setup and Trim Settings) to the factory default
values, perform the following steps:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until “FACTORY RE-
SET, (Hold INPUT)” appears on the Information
Display. Refer to figure 54.
3. Press and hold in the INPUT Control until “FAC-
TORY RESET, In Progress!” appears on the Infor-
mation Display, then release the INPUT Control.
Refer to figures 55 and 56.
4. Press the Front Panel STAND/BY Push-button to
switch the C2700 on.
Figure 56
FACTORY RESET
Completed!
Figure 54
FACTORY RESET
(Hold INPUT)
Figure 55
FACTORY RESET
In Progress!
Setup, con’t
Power Mode
The C2700 incorporates an Auto Off Feature, which
automatically places the Preamplifier into the Power
Saving Standby/Off Mode. This occurs approximately
30 minutes after there has been an absence of user ac-
tivity (includes changes to any of the Operation Func-
tions such as source selection, volume adjustment,
etc.) or absence of an audio signal. If it is desirable to
disable the Auto Off Feature perform the following
steps:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until “SETUP: Auto
Off, Enabled” appears on the Information Display.
Refer to figure 52.
3. Rotate the VOLUME (ADJUST) Control to select
“Disabled”. Refer to figure 53.
Figure 52
SETUP: Auto-Off
Enabled
Figure 53
SETUP: Auto-Off
Disabled
Loading ...
Loading ...
Loading ...