McIntosh C2700 User Manual

Loading ...

How to use the HR085 Remote Control

How to use the Remote Control

The supplied C2700 Remote Control (HR085) is ca-

pable of directly controlling the functions of contem-

porary McIntosh Source Components connected to the

C2700 via the Data Ports.

Notes: 1. If at any time the C2700 seems unresponsive

to the HR085 Remote Control Commands,

press the DEVICE Push-button to select

first.

2. For additional information on using the

HR085 Remote Control with the McIntosh

Model, please refer to the “How to Operate”

starting on page 22.

3. For additional information on assigning the

Data Ports, refer to “How to Setup” on page

13.

Trim

Press the TRIM Push-button until the desired Trim

function (Balance, Trim Level, etc.) appears on the

C2700 Front Panel Display, then press the LEVEL Up

or Down Push-button to adjust the Trim setting.

Note: Press the TRIM Push-button to recall the last Trim

function selected. For additional information on

using the Trim Functions refer to “How to Oper-

ate” pages 22-26.

Output Selection

Press the BLUE (Setup) Push-button followed by

the AM (Output 1) or FM (Output 2) Push-button, to

control the Rear Panel Audio OUTPUTS 1, 2 (ON or

OFF) and Power Control TRIG 1 / TRIG 2.

Note: For additional information on assigning the Out-

puts (1 and 2) and Power Control Triggers (1 and

2) refer to page 16.

Loading ...

McIntosh C2700 - 2-Channel Vacuum Tube Preamplifier