Loading ...
Loading ...
Loading ...
17
Setup, con’t
Data Ports
Data Ports Connections between the C2700 and a
McIntosh Source Component allow for basic func-
tion control of the source component using the C2700
supplied HR085 Remote Control. By default, all of the
four Data Ports are set to send the same Data to the
selected source. To dedicate a given Data Port for only
one source component (example, source component
connected to the BAL 1 Input will be assigned to Data
Port 1) perform the following Steps:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until “SETUP: Data
Ports, (Hold INPUT)” appears on the Information
Display. Refer to figure 34.
3. Press and hold in the INPUT Control until “SET-
UP: DATA PORT 1, All Data” appears on the
Display. Refer to figure 35.
4. Rotate the VOLUME (ADJUST) Control to select
“BAL 1” Input. Refer to figure 36.
5. In a similar manner, perform steps 3 and 4 to as-
sign any additional Data Ports.
6. Exit the SETUP Mode by several presses of the
INPUT Control.
Figure 34
SETUP: Data Ports
(Hold INPUT)
Figure 35
SETUP: DATA PORT 1
All Data
Figure 36
SETUP: DATA PORT 1
BAL 1
When the C2700 is part of a Home Theater or Mul-
tichannel Audio System, the Right and Left Front
Channels from an Audio/Video Processor or Surround
Decoder can “Passthru” the C2700 and onto its associ-
ated Power Amplifier(s). The Setup Mode allows se-
lection of the specified C2700 Input to be used for the
Right and Left Front Channels. In the example below,
the Right and Left Front Channels from the Audio/
Video Processsor will be connected to the BALanced
2 Input Connectors on the C2700. Refer to pages 7 and
8 for additional connection information.
Note: The Phono and Digital Inputs are not assign-
able as a Passthru Input.
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until “SETUP: Passth-
ru, OFF” appears on the Information Display.
Refer to figure 37.
3. Rotate the VOLUME (ADJUST) Control to select
“BAL 2” Input. Refer to figure 38.
4. Exit the SETUP Mode by several presses of the
INPUT Control.
The C2700 HDMI Input Connector has (ARC) Audio
Return Channel Circuitry, allowing the Audio Selec-
tion and Control Command of HDMI TV/Monitor De-
vices. To deactivate the Consumer Electronics Control
(CEC) of the HDMI Devices connected to TV/Monitor
HDMI inputs, perform the following steps:
1. Press and hold in the INPUT Control to change
the SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until “SETUP: HDMI
CEC, ON” which is the default setting, appears
on the Information Display. Refer to figure 41.
3. To deactivate the Consumer Electronics Control
(CEC) of the HDMI Devices connected to the TV/
Monitor, rotate the VOLUME Control until “SET-
UP: HDMI CEC, OFF” appears on the Informa-
tion Display. Refer to figure 42.
To prevent the (CEC) Circuitry from switching AC
Power Off to the C2700, change the C2700 “SETUP:
HDMI CEC PWR, ON” to “SETUP: HDMI CEC
PWR, OFF”. Refer to figures 43 and 44:
HDMI (ARC) and (CEC)
Passthru
Figure 37
SETUP: Passthru
OFF
Figure 38
SETUP: Passthru
BAL 2
Figure 41
SETUP: HDMI CEC
ON
Figure 42
SETUP: HDMI CEC
OFF
Figure 43
SETUP: HDMI CEC PWR
ON
Figure 44
SETUP: HDMI CEC PWR
OFF
Loading ...
Loading ...
Loading ...