Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
33
19. To Remove an Oven Element Thermal Cut-out
Disconnect from electricity supply.
Pull the cooker forward to gain access to the cover box. Undo
the cover screws and lift clear. The cut-out is located on the
earth plate beside the oven element connections. Disconnect
the cut-out wiring. Undo the xings that secure the cut-out to
the earth plate and remove. Fit the replacement control and
re-assemble in reverse order.
20. To Remove an Oven Inner Back
Disconnect from electricity supply.
Open the door and remove the shelves. Remove the screws
and washers securing the inner back to the back of the oven
(Fig.8-12). Carefully lift away the inner back. Reassemble in
reverse order making sure that the screws and washers are
fully tightened.
21. To Remove the Fan Oven Element
Disconnect from electricity supply.
Remove the oven inner back (see 20). Remove the two screws
from the top of the element and the one from the bottom of
the element inside the oven (Fig.8-13).
Lift the element out carefully, disconnecting the terminals
connected to the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear.
Remove the screws securing the electric cover to the back
sheet, remove the cover and disconnect the terminals from
the rear.
22. To Replace an Oven Fan
Disconnect from electricity supply.
Pull the cooker forward to gain access to the rear. Remove
the screws securing the electric cover to the back sheet and
remove the cover.
Disconnect the three terminals connected to the fan noting
their position. Remove the oven inner back (see 20). Hold the
fan blade and remove the centre nut (left-hand thread) two
brass washers, fan blade and circlip. Unscrew the fan retaining
nuts and washers (three o each) and lift the fan away from
the rear of the cooker. Fit the new fan and reassemble in
reverse order.
Check the operation of the oven.
23. To Change Oven Light Bulb
Disconnect from electricity supply.
Make sure the oven is cool. Open the oven door and remove
the oven shelves. Remove the grill pan and support from the
grill chamber.
Unscrew the bulb cover by turning anticlockwise. It may be
very sti (Fig.8-14).
Taking care to protect your ngers in case the bulb should
shatter, unscrew the old bulb.
Fit an Edison screw tting 15W 240V lamp, FOR OVENS. It
must be a special bulb, heat resistant to 300°C (Fig.8-15).
Screw in the new bulb, and then screw back the bulb cover.
Turn on the electricity supply and check that the bulb now
lights.
ArtNo.324-0007 Unscrewing the bulb cover
Fig.8-14
ArtNo.324-0005 Oven light bulb
Fig.8-15
ArtNo.320-0020 Oven back fixing screws
Fig.8-12
Element fixing screws
ArtNo.321-0005 Fan oven element
Fig.8-13
Loading ...
Loading ...
Loading ...