Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe when you have nished.
28
Fitting the Plinth
Classic & Professional+ models
Loosen the three screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and t each end keyhole over their respective screws. Tighten
the xing screws (Fig.7-15).
Toledo model
Fit the inner plinth to the bottom front of the cooker using
the 5 screws provided (Fig.7-16.
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (Fig.7-17).
Fitting the Splashback (Classic model only)
The cooker can be installed with or without the supplied
splashback.
Position the splashback on the rear of the hotplate and secure
with the screws supplied (Fig.7-18).
Customer Care
Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand oven the
instructions.
Thank you.
ArtNo.000-0012 - Securing the plinth
Fig.7-15
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
Fig.7-16
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth
Outer plinth fixing screw
Inner plinth
Fig.7-17
Fig.7-18
Loading ...
Loading ...
Loading ...