Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe when you have nished.
25
ArtNo.010-0004 Moving the cooker
ArtNo.010-0002 Rear roller nut
ArtNo.010-0010 Lowering the rear rollers (90)
x10
Fig.7-5
Fig.7-3
Fig.7-4
ArtNo.010-0001 Removing the packaging
Fig.7-2
Moving the Cooker
On no account try and move the cooker while it is
plugged into the electricity supply.
The cooker is very heavy, so take great care.
DO NOT use the door handles or control knobs to
manoeuvre the cooker.
We recommend two people manoeuvre the cooker. Ensure
that the oor covering is rmly xed, or removed to prevent it
being disturbed when moving the cooker around.
From the back tilt the cooker forward and remove the rear
half of the polystyrene base pack (Fig.7-2). Repeat from the
front and remove the front half of the poly base.
Now LOWER THE TWO REAR ROLLERS. First t the levelling
tool on the hexagonal adjusting nut, at both the front bottom
corners of the cooker (Fig.7-3). Make 10 complete (360°)
turns clockwise (Fig.7-4). (This means turning and removing
the levelling tool 20 times.)
Completing the Move
Unfold the rear edge of the cardboard base tray. Open the
grill door and right-hand oven door so that you can get a
good grip on the bottom of the fascia panel as you move the
cooker.
Grip under the fascia panel and lift the front of the cooker
slightly (Fig.7-5).
DO NOT use the door handles or control knobs to
manoeuvre the cooker.
Carefully push the cooker backwards o the pack base and
remove the cardboard base tray. Position the cooker close to
its nal position, leaving just enough space to get behind it.
Levelling
It is recommended that you use a spirit level on a shelf in one
of the ovens to check for level.
Place the cooker in its intended position, taking care not to
twist it within the gap between the kitchen units as damage
may occur to the cooker or the units.
The front feet and rear rollers can be adjusted to level the
cooker. To adjust the height of the rear of the cooker use the
levelling tool supplied to turn the adjusting nuts at the front
bottom corners of the cooker. To set the front feet turn the
bases to raise or lower.
Loading ...
Loading ...
Loading ...