Loading ...
Loading ...
Loading ...
E
184
The picture is too dark.
1 The flash was not used.
[ Push the Flash pop-up lever to set the flash. (P. 100)
2 The flash was blocked by a finger.
[ Hold the camera correctly, keeping your fingers away
from the flash. (P. 74)
3 The subject was out of the working range of the flash.
[ Shoot within the flash working range or use the
extension flash. (P. 100/104)
4 The subject was too small and was backlit.
[ Set the flash to Fill-In mode or use the Spot metering
mode. (P. 110/92)
5 The extension flash is not connected or is turned off in the
Fill-In Flash + Extension Flash mode.
[ Connect and turn it on. (P. 104)
The picture is too bright.
1 The flash was set to the Fill-In Flash mode.
[ Set the flash mode to one other than Fill-In Flash.
(P. 102)
2 The subject was very bright.
[ Either adjust the exposure (P. 134) or point the
camera away from overly bright subjects.
The colors of pictures taken indoors look unnatural.
1 The lighting fixture(s) affected the picture.
[ Set the flash mode to Fill-In. (P. 110)
2 The Manual White Balance setting is wrong.
[ Select the right white balance. (P. 140)
The picture has obscured edge(s).
1 The lens was partly blocked by a finger or the strap.
[ Hold the camera correctly, keeping your fingers and
the strap away from the lens. (P. 74)
Loading ...
Loading ...
Loading ...