Loading ...
Loading ...
Loading ...
50
Step 4. Console, seat, pedals and beauty covers assembly
• Plug in the two Computer Cables (155 & 157) and two Hand pulse
cables (26) into the connectors in the back of the Console (34). Install
the Console (34) onto the Console Mast with the two M5x12mm
bottom screws rst (58). Install the cover plate (12) with the two top
mounting screws (58).
• Install the Front Stabilizer Cover (40) and the Rear Stabilizer Cover (41)
onto the Main Frame (1) with four M5x12mm Phillips Head Screws (58).
• Install the Pedals (138 & 139) onto the Crank arms. Remember that the
left pedal has a reverse thread and will be screwed into the crank in
the opposite rotation from normal threads. There is an “L” stamped
into the end of the threaded post of the left pedal and an “R” in the
right. Make sure to tighten the pedals as much as you possibly can. It
may be necessary to re-tighten the pedals if you feel a thumping
during pedaling the bike. A noise or feeling such as a thumping or
clicking is usually caused by the pedals not being tight enough.
• Install the seat (120) onto the seat post. Mount the Drink Bottle Holder
(116) onto the Console Mast (2) with two M5x12mm Phillips Head
Screws (58).
34
12
116
58
58
58
58
58
1
41
40
58
120
138
139
93 117
26
26
155
157
Loading ...
Loading ...
Loading ...