Loading ...
Loading ...
Loading ...
Network settings
69
ENGLISH
Select Wired or Wireless.
Use 3 or 4 and 2 to select Automatic (DHCP).
* DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
If there is not DHCP, the following steps show how to get DNS and Gateway settings of the
current network from the PC connected to the same network:
On your PC, Click Start > Run
Type cmd and click OK
Type ipconfig/all
Write down the DNS and Gateway of the current connection.
On Center
Press MENU to enter the menu screen.
Use 3 or 4 and 2 to enter Settings followed by Network, then Wired.
Press 2 to continue.
3
2
1
4
3
2
1
4
3
Loading ...
Loading ...
Loading ...