Loading ...
Loading ...
Loading ...
Version 12/19/2008 81
www.VIZIO.com
Programming for DVD Player
1. Manually turn on the DVD Player.
2. Press the DVD button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your DVD player in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn
off.
Note:
x If your DVD player does not respond, try all the codes for your brand. If the codes do not work, or
your brand is not listed, see “Searching for Component Codes.”
x Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.
Programming for Audio Amp/Receiver
1. Manually turn on the Receiver.
2. Press the AUDIO button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Receiver in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
5. If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the
component and manufacturer.
6. Point the remote control at the Receiver and press the POWER button. The Receiver will turn off.
Note:
x If your Receiver does not respond, try all the codes for your Receiver brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
x Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.
Loading ...
Loading ...
Loading ...